SSDReporter

Posted : admin | On 01-05-2021



SSDReporter

SSDReporter 1.5.7 (1453) 破解版 (实时监控SSD健康状况). SSDReporter is an application that checks the health of your internal Solid State Disks (“SSD” aka “Flash Storage”). Since SSDs have a limited life-time determined by the number of write operations it is important to keep an eye on your SSD status. SSDReporter 1.5.4 macOS-P2P Posted on at 12:42 in Applications, MAC by Omega S SDReporter is an application that checks the health of your internal solid state drives (“SSD” aka “Flash Storage”).

v1.5.5


Description:

SSDReporter is an application that checks the health of your internal Solid State Disks ('SSD'). Since SSDs have a limited life-time determined by the number of write operations it is important to keep an eye on your SSD status. SSDReporter can warn you by e-mail or on-screen each time the health of your SSD decreases and/or when the health falls below the 'warning' or 'error' thresholds. The current status of your SSDs is also always easily recognizable because SSDReporter changes its icon (optionally in the menubar) from green to yellow (warning threshold) and finally red (error threshold) as the SSD health decreases.


SSDReporter

Limitations & Compatibility:

Only 'internal' SSDs are supported:
• SSDs connected via USB&FireWire are unsupported but may be made to work with 3rd party drivers.
• SSDs connected via eSATA & ThunderBolt are unsupported may work if the enclosure is S.M.A.R.T.-compatible.
Some SSDs do not support S.M.A.R.T. at all and therefore do not work with SSDReporter:
• the 'OWC Aura SSD for Mac Pro' is incompatible
Some SSDs do not report useful health/lifetime attributes over S.M.A.R.T. and therefore do not work with SSDReporter:
• the 'SEAGATE 600 SSD Series' (ST*HM000, ST*HM001) is incompatible
Some SSDs report health attributes only in mode which is incompatible with Mac OS X and therefore do not work with SSDReporter:
• a few 2013 and 2014 MacBookAir models contain 'TOSHIBA' SSDs (APPLE SSD TS0128F/TS0256F) which are incompatible
• some 'OCZ' SSDs models including the ARC, ONYX, AGILITY4, VECTOR, &VERTEX3/4/450/460 are incompatible (but the TRION works)
• most 'OWC' SSDs models including the MERCURY ELECTRA are incompatible
• many 'Micron' and 'Crucial' SSDs are incompatible
• many 'Mushkin' SSDs are incompatible
Please make sure to try the free DEMO VERSION prior to purchase to check compatibility.


System Requirements:

• macOS 10.13 'High Sierra' or later

• At least one compatible internal 'Solid State Disk' (SSD) or 'Flash Storage' device (see above)


License & Cost:

SSDReporter is licensed under a proprietary license and costs 4.99$.


Contact & Support:

The product website is located here: https://www.corecode.io/ssdreporter/

Ssdreporter mac

Technical support is available only from within SSDReporter, select 'Contact support…' in the 'Help' menu.


Usage:

0.) Download SSDReporter from the 'Mac App Store' and once it has finished downloading start it from Launchpad or your Applications folder.
1.) The 'SSDReporter Welcome Assistant' will be opened. The assistant gives you options to automatically launch SSDReporter when starting your computer and the option to remove SSDReporter from being displayed in the Dock. It is strongly recommended to check both options as SSDReporter needs to be running all the time to perform its SSD checks. Click 'Finish Setup' to apply your settings.
2.) SSDReporter will now open its main configuration window because this is the first time you use it. You can now see the 'Status' tab which displays an overview over the result of all SSD checks and the status of each individual SSD. Here you can configure a plethora of options:
• whether SSDReporter should notify you each time the health decreases or only when the warning or the error threshold is reached
• in which way SSDReporter should notify you about health problems: by e-mail or by alert dialogue or on-screen notification
• the SSD check interval and the 'warning' and 'error' thresholds
3.) After you've configured SSDReporter to your liking you can close its configuration window. As long as SSDReporter runs it will protect you by checking your SSDs and it will alert you when there are health problems. Note that it will depend on the vendor and your device guarantee if a SSD that reaches the end of its lifetime will be replaced for free.
If you want to have SSDReporter try to check all disks even if it doesn't recognise them as being a SSD, you can run this command in the Terminal (see FAQ):

defaults write com.corecode.SSDReporter CheckAllDisks -bool true


Copyright © 2020 CoreCode Limited.

All rights reserved.

All used trademarks are the property of the respective trademark owners.

THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


  • 카테고리:Utilities
  • 최근 업데이트: 2020-03-05
  • 현재 버전: 1.5.5
  • 파일 크기: 5.17 MB
  • 개발자:CoreCode Limited
  • 호환성: 필요 Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 and Windows 10

다운로드 링크

앱 다운로드 ⇩SSDReporter사용 SSDReporter 귀하의 Windows 컴퓨터에서 실제로 매우 쉽습니다하지만 당신 이이 과정을 처음 접한다면, 당신은 분명히 아래 나열된 단계에주의를 기울일 필요가있을 것입니다. 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야하기 때문입니다. 다운로드 및 설치를 도와 드리겠습니다 SSDReporter 아래의 간단한 4 단계로 컴퓨터에서:

1 : Windows 용 Android 소프트웨어 에뮬레이터 다운로드

에뮬레이터의 중요성은 컴퓨터에서 안드로이드 환경을 흉내 내고 안드로이드 폰을 구입하지 않고도 안드로이드 앱을 설치하고 실행하는 것을 매우 쉽게 만들어주는 것입니다. 누가 당신이 두 세계를 즐길 수 없다고 말합니까? 우선 아래에있는 에뮬레이터 앱을 다운로드 할 수 있습니다.
A. Nox App . OR
B. Bluestacks App.
Bluestacks는 매우 대중적이므로 개인적으로 'B'옵션을 사용하는 것이 좋습니다. 문제가 발생하면 Google 또는 Naver.com에서 좋은 해결책을 찾을 수 있습니다.


2 : 이제 Windows PC에 소프트웨어 에뮬레이터 설치

Bluestacks.exe 또는 Nox.exe를 성공적으로 다운로드 한 경우 컴퓨터의 다운로드 폴더 또는 다운로드 한 파일을 일반적으로 저장하는 곳으로 이동하십시오.
찾으면 클릭하여 응용 프로그램을 설치하십시오. Ilife 08 free download for mac. PC에서 설치 프로세스를 시작해야합니다.
다음을 클릭하여 EULA 라이센스 계약에 동의하십시오.
응용 프로그램을 설치하려면 화면 지시문을 따르십시오.
위 사항을 올바르게 수행하면 소프트웨어가 성공적으로 설치됩니다.


3 : Windows PC 용 SSDReporter 사용 방법 - Windows 7/8 / 8.1 / 10

이제 설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 지금 입력하십시오. - SSDReporter 앱을 쉽게 볼 수 있습니다. 그것을 클릭하십시오. 응용 프로그램 창이 열리고 에뮬레이터 소프트웨어에 응용 프로그램이 표시됩니다. 설치 버튼을 누르면 응용 프로그램이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
그런 다음 '모든 앱'아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 SSDReporter 상. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.


Mac

Ssdreporter Review

보너스 : Android 및 iOS 용 다운로드

Android에서 다운로드

개발자 설명

Ssdreporter Osx

SSDReporter is an application that checks the health of your internal Solid State Disks ('SSD' aka 'Flash Storage'). Since SSDs have a limited life-time determined by the number of write operations it is important to keep an eye on your SSD status. SSDReporter can warn you by e-mail or on-screen each time the health of your SSD decreases and/or when the health falls below the 'warning' or 'error' thresholds. The current status of your SSDs is also always easily recognizable because SSDReporter changes its icon (optionally in the menubar) from green to yellow (warning threshold) and finally red (error threshold) as the SSD health decreases.*** LIMITATIONS & COMPATIBILITY *** Only 'internal' SSDs are supported, disks connected via USB&FireWire do not work with SSDReporter.eSATA & ThunderBolt connected SSDs may work if the enclosure is S.M.A.R.T.-compatible.Some SSDs do not support S.M.A.R.T. at all or incompletely and therefore do not work with SSDReporter:- a few 2013 and 2014 MacBookAir models contain 'TOSHIBA' SSDs (APPLE SSD TS0128F/TS0256F) which are incompatible- the 'SEAGATE 600 SSD Series' is incompatible- most 'Micron' and 'Crucial' SSDs are incompatible- some 'OCZ' SSDs including the ArC, ONYX, AGILITY4, VECTOR & VERTEX3/4/450/460 but excluding the TRION are incompatible - most 'OWC' SSDs including the MERCURY ELECTRA and the 'Aura SSD for Mac Pro' are incompatible- many 'Micron' and 'Crucial' and 'Mushkin' SSDs are incompatible*** SYSTEM REQUIREMENTS *** - macOS 10.13 'High Sierra' or later- At least one compatible internal 'Solid State Disk' (SSD) or 'Flash Storage' disk (see above)*** WEBSITE *** For more information please visit:https://www.corecode.io/ssdreporter/

Ssdreporter 1.5.5

appsview_module

Ssdreporter For Mac